Will be cut separately for your personalization. 2 pieces will be included. Hat and feet only!
Full Color High Heat Screen Print Transfer-Super Soft & Thin
Recommended for
- 100% Cotton
- May dye migrate
Recommended Heat Press Machines
- Hix N880, HT400, HT600,S650, SM20
- Hotronix, Fusion, Maxx
- Geo Knight, Auto, Clam, Swing. *Must be able to provide 50 PSI
- Insta Heat Machines
Application Instructions:
- Preheat Garment if necessary to remove excess moisture
- Temperature: 350°F / 183°C
- Time: 7 seconds
- Pressure: 60 PSI
- Do not use a teflon sheet or teflon bonnet between heat platen and transfer paper.
- Hot Peel
Recommended Heat Press Machines
- Hix N880, HT400, HT600,S650, SM20
- Hotronix, Fusion, Maxx
- Geo Knight, Auto, Clam, Swing. *Must be able to provide 50 PSI
- Insta Heat Machines
If you own a heat press which is Not one of the recommended brands, please follow the steps below.
- Increase your temperature +10° at at time
- Preheat your garment for 7 - 10 seconds
- Use the Maximum pressure your machine will allow
- **It is not recommended to use “Bargain type” heat machines or hand held heat machines found on Amazon (typically cost less than $500) as pressing issues may occur.
- Cricut Easy Press will not work with our heat transfers.
Washing Instructions:
Allow 24 - 48 hours to allow the garment to completely cure before machine wash. Wash inside out in cold water. Tumble dry low heat.
If LIFTING occurs, continue to press WITH ADDED PRESSURE and HEAT. It is recommended to use a heat gun to check temperature on heat press plates.